DTF Heat Transfers (Large)

Ready to press DTF transfers for t-shirts, sweatshirts, tote bags and more.

• Sizes and specification vary by design so please read design descriptions for individual details ***Combos include large and small pairing as pictured 

PLEASE READ ENTIRE DESCRIPTION

Direct to film, commonly known as DTF, is a process in which a graphic printed onto a piece of film with various colored inks is applied to an apparel item. This pre-printed film is binded to the garment through heat and pressure from a heat-press machine. This creates a long-lasting and detailed graphic that can be placed on an array of garments.
___________________

HOW TO APPLY 
Heat settings : 325° F to 350° F

Pre-Press: Garment for 5 seconds -to remove moisture

1st Press: Apply the transfer to the garment (printed side down) and press for 15-30 seconds.

• Let cool down and peel when cool to the touch (usually about 30 seconds).

2nd press: Cover the printing with teflon/parchment sheet and press again at 5 -8 seconds.
The recommended pressure is 65-70 psi.
___________________

DISCLAIMER
The DTF prints are best applied using a heat press, as Cricut Press may not provide enough pressure. Therefore we recommend application using a heat press. We are not responsible for any pressing errors. Please follow directions included with every order.
___________________

RETURNS/EXCHANGES
Due to the nature of the product, we do not allow returns or exchanges. If there is an issue with your order, please contact us within 5 days of receiving your order! It is your responsibility to look over prints before pressing.